MOPA MFPT 60M
A 60W, CE-certified miniaturized pulsed fiber laser delivering M² ≤1.4 beam quality for marking and engraving.
MOPA MFPT 60M Pulsed Fiber Laser
The MFPT 60M tops out this group at 60W, sharing the same beam quality (M² ≤1.4), 220 × 166 × 70mm footprint, and 3-10m cable length as the MFPT 50M, with the most power headroom in the group for higher-throughput marking and engraving work.
Output is tunable from 10% to 100% of rated power, with repetition rates from 1 to 4000kHz. It runs on air cooling, draws 300W from a 24VDC supply — the most of any model in this group — and ships CE-certified with a 2-year standard warranty, extendable up to 5 years.
Key Features
The same M² ≤1.4 beam quality as the MFPT 50M is unchanged at 60W, so detail doesn't loosen as output climbs to the top of this group.
Runs in continuous-wave or pulsed mode, with pulse widths from 1ns down to 2ns, to match the mark type a given material calls for.
Output is adjustable from 10% to 100% of rated power, for dialing in exactly the energy a given material or finish calls for.
Output is adjustable from 10% to 100% of rated power, for dialing in exactly the energy a given material or finish calls for.
Runs on air cooling rather than a closed water loop, simplifying installation for bench-top or OEM integration.
At roughly 3.5kg — the heaviest chassis in this group of MOPA miniaturized lasers — the MFPT 60M carries the most power headroom for higher-throughput marking and engraving work.
Application Examples
Product Comparison
Select products from the dropdown options below to compare parameters and find your perfect laser.
| Product type | |
| Series | |
| Nominal power | |
| Module | |
| Polarization | |
| Power Redundancy | |
| Power Tunability | |
| Wavelength | |
| Power Stability | |
| Modulation Frequency | |
| Pulse Energy (mJ) | |
| Repetition Rate (kHz) | |
| Fiber Connectors | |
| Certifications and Safety | |
| Cooling Method | |
| Housing form | |
| Warranty | |
Browse our Series
