Maxphotonics
Maxphotonics Elite MFMC 50000W Multi-Module CW Laser

Elite MFMC 50000

A 50kW multi-module, cabinet-mounted fiber laser delivering ≥5% built-in power redundancy for cutting, welding, and cladding.

Elite MFMC 50000 Industrial Fiber Laser

The MFMC 50000 steps up to 50kW within the same multi-module cabinet architecture and beam quality range (BPP 4.0–5.5 mm·mrad @100μm) as the MFMC 40000, in a chassis built to house the extra module capacity — at roughly 936kg against the MFMC 40000's 857kg, for higher-throughput cutting, welding, and cladding work.

Like the MFMC 40000, power stability holds within ±1% over an hour of continuous running, with the same 10–100% power tunability and up to 5kHz modulation frequency. It connects over digital I/O, with EtherCAT and PROFINET available, and ships CE, FDA, and ETL certified, with safety systems rated to Performance Level D (PL-d) and a 3-year standard warranty, extendable to 5 years.

Nominal Power
50000 W
Beam Quality BPP
4.0 to 5.5 (@ 100 μm) / 5.5 to 6.5 (@ 150 μm) / 8.0 to 10.0 (@ 200 μm)
Power Redundancy
≥ 5 % (Typ.)
Fiber Cable Connectors (BDO)
LOE
Interface
Digital I/O (EtherCAT / ProfiNET opt.)
Warranty
3 years standard (extendable to 5 years)
Certificates
CE, FDA, ETL (UL compatible) and Performance Level D (PL-d)

Key Features

Consistent Beam Quality at Higher Power

The same BPP 4.0–5.5 mm·mrad (@100μm) beam quality as the MFMC 40000 carries through to 50kW, keeping output consistent as module count increases.

≥5% Built-In Power Redundancy

≥5% of rated power held in reserve across the module array means the MFMC 50000 keeps running at full output even if one module underperforms.

Fine-Grained Power Control

10–100% power tunability and modulation up to 5kHz give the MFMC 50000 the same controlled-output flexibility as the MFMC 40000.

Straightforward Automation Integration

Digital I/O, with EtherCAT and PROFINET available, integrates the MFMC 50000 into existing cutting, welding, and cladding lines without custom middleware.

Multi-Module Cabinet Architecture

The same multi-module cabinet design as the MFMC 40000 combines additional laser modules into one enclosure to reach 50kW.

Built for Continuous Operation

Runs on a closed water-cooling loop across a +10°C to +40°C operating range, with humidity tolerance up to 85% for varied shop-floor conditions.

Application Examples

Stainless Steel WeldingStainless Steel Welding
Carbon Steel CuttingCarbon Steel Cutting
Stainless Steel CuttingStainless Steel Cutting

Product Comparison

Select products from the dropdown options below to compare parameters and find your perfect laser.

Product type
Series
Nominal power
Module
Polarization
Power Redundancy
Power Tunability
Wavelength
Power Stability
Modulation Frequency
Pulse Energy (mJ)
Repetition Rate (kHz)
Fiber Connectors
Certifications and Safety
Cooling Method
Housing form
Warranty